My Blog

By Zsambeky, Chaney & Associates Family Dentistry
February 27, 2019
Category: Dental Procedures
Tags: orthodontics  
AnAssortmentofOrthodonticToolshelpsusSolveComplexBiteProblems

There are an assortment of techniques and treatments in an orthodontist's toolkit, braces being the most common and best known. Of course, there wouldn't be any tools at all if teeth couldn't move naturally.

Teeth aren't directly connected to the jawbone. An elastic tissue called the periodontal ligament lies between each one, with tiny fibers attaching to the tooth on one side and to the bone on the other. The ligament's elasticity and other qualities allow micro-movements of the teeth as we bite.

The ligament can also adapt to changes in the mouth and teeth by allowing the teeth to move to different positions. That's the basic concept behind braces: we thread a thin wire through brackets attached to the teeth, which we then attach to anchor points (usually back teeth not intended to move) and apply tension to it. Gradually over time, the target teeth move.

But what if your malocclusion (poor bite) is more complicated or the back teeth can't supply enough anchorage for moving the intended teeth? That's where we take advantage of other sources of anchorage.

One such source is the patient's skull, which we can make use of through special headgear worn a few hours a day. The device consists of a strap under tension that runs around the back of the head or neck to a wire housing attached to brackets on the target teeth. If you want to “pull” the teeth forward, the strap would come over the chin, forehead or a combination of both.

We may sometimes want to isolate some teeth to move without moving nearby teeth, such as moving front teeth backward to close a space without affecting teeth further to the rear. We can create a separate anchor point in the jaw with a TAD or temporary anchorage device.

TADs are tiny screws made of stainless steel inserted temporarily into the bone. We loop an elastic band over the TAD on one end and to a bracket or tension wire attached to the target teeth on the other. When we've achieved the teeth's new position we can easily remove the TAD from the bone.

These various tools make it possible to correct difficult or complex malocclusions. They may not always look attractive, but they'll help ensure the final result is.

If you would like more information on available orthodontic treatments, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”

By Zsambeky, Chaney & Associates Family Dentistry
February 17, 2019
Category: Dental Procedures
NotJazzedAboutWearingBracesConsiderClearAlignersInstead

Wearing orthodontic braces brings challenges to daily life. During treatment a patient will need to avoid certain foods and habits, take more time to brush and floss properly, and may endure occasional discomfort. But the effect of metal braces on appearance can be especially difficult, especially for peer-conscious teens.

Clear aligners, though, offer an alternative to braces that could make some of these challenges easier, particularly with your appearance. Aligners are clear plastic trays that fit over the teeth to move them. They can be removed by the wearer for easier brushing and flossing or for special occasions. Best of all, they're much less noticeable than metal braces.

Clear aligners were developed thanks to advances in digital technology. An orthodontist uses a computer application incorporating the data from photographs, x-rays or CT scans of a patient's teeth and jaws to produce a series of clear plastic trays. The patient then wears each tray for about two weeks before changing to the next tray in the sequence.

The trays apply pressure much like metal braces to gradually move teeth to the desired position on the jaw. Each tray is slightly smaller in size than the previous tray in the sequence, so that the progression of tooth movement continues with each succeeding tray. The treatment time is about the same as with conventional braces.

This new orthodontic tool works well for many common bite problems, but until recently they've been limited in scope. But new designs in trays and attachments called buttons added to teeth to provide more leverage have greatly increased their use for more complex bite issues.

Clear aligners also have one other disadvantage, ironically due to one of their principal benefits, removability. Although they can be taken out, they must be worn consistently to achieve results. Some younger patients may not have the maturity level and discipline to responsibly wear their aligners as they should.

That's one issue you'll need to discuss with your orthodontist if you're considering clear aligners for your teen. But if they can maintain wearing consistency, and they have a bite problem that can be corrected with aligners, both you and your teen may find this choice more agreeable and attractive than braces.

If you would like more information on clear aligners, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Clear Aligners for Teens.”

By Zsambeky, Chaney & Associates Family Dentistry
February 07, 2019
Category: Dental Procedures
HeresWhatyouNeedtoKnowaboutaRootCanalTreatment

A root canal treatment is a common procedure performed by dentists and endodontists (specialists for inner tooth problems). If you're about to undergo this tooth-saving procedure, here's what you need to know.

The goal of a root canal treatment is to stop tooth decay within a tooth's interior and minimize any damage to the tooth and underlying bone. This is done by accessing the tooth's pulp and root canals (tiny passageways traveling through the tooth roots to the bone) by drilling into the biting surface of a back tooth or the "tongue" side of a front tooth.

First, though, we numb the tooth and surrounding area with local anesthesia so you won't feel any pain during the procedure.  We'll also place a small sheet of vinyl or rubber called a dental dam that isolates the affected tooth from other teeth to minimize the spread of infection.

After gaining access inside the tooth we use special instruments to remove all of the diseased tissue, often with the help of a dental microscope to view the interior of tiny root canals. Once the pulp and root canals have been cleared, we'll flush the empty spaces with an antibacterial solution.

After any required reshaping, we'll fill the pulp chamber and root canals with a special filling called gutta-percha. This rubberlike, biocompatible substance conforms easily to the shape of these inner tooth structures. The filling preserves the tooth from future infection, with the added protection of adhesive cement to seal it in.

Afterward, you may have a few days of soreness that's often manageable with mild pain relievers. You'll return for a follow-up visit and possibly a more permanent filling for the access hole. It's also likely you'll receive a permanent crown for the tooth to restore it and further protect it from future fracture.

Without this vital treatment, you could very well lose your tooth to the ravages of decay. The time and any minor discomfort you may experience are well worth the outcome.

If you would like more information on treating tooth decay, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Root Canal Treatment: What You Need to Know.”

By Zsambeky, Chaney & Associates Family Dentistry
January 28, 2019
Category: Oral Health
JamieFoxxChipsaTooth-ThisTimebyAccident

Some people are lucky — they never seem to have a mishap, dental or otherwise. But for the rest of us, accidents just happen sometimes. Take actor Jamie Foxx, for example. A few years ago, he actually had a dentist intentionally chip one of his teeth so he could portray a homeless man more realistically. But recently, he got a chipped tooth in the more conventional way… well, conventional in Hollywood, anyway. It happened while he was shooting the movie Sleepless with co-star Michelle Monaghan.

“Yeah, we were doing a scene and somehow the action cue got thrown off or I wasn't looking,” he told an interviewer. “But boom! She comes down the pike. And I could tell because all this right here [my teeth] are fake. So as soon as that hit, I could taste the little chalkiness, but we kept rolling.” Ouch! So what's the best way to repair a chipped tooth? The answer it: it all depends…

For natural teeth that have only a small chip or minor crack, cosmetic bonding is a quick and relatively easy solution. In this procedure, a tooth-colored composite resin, made of a plastic matrix with inorganic glass fillers, is applied directly to the tooth's surface and then hardened or “cured” by a special light. Bonding offers a good color match, but isn't recommended if a large portion of the tooth structure is missing. It's also less permanent than other types of restoration, but may last up to 10 years.

When more of the tooth is missing, a crown or dental veneer may be a better answer. Veneers are super strong, wafer-thin coverings that are placed over the entire front surface of the tooth. They are made in a lab from a model of your teeth, and applied in a separate procedure that may involve removal of some natural tooth material. They can cover moderate chips or cracks, and even correct problems with tooth color or spacing.

A crown is the next step up: It's a replacement for the entire visible portion of the tooth, and may be needed when there's extensive damage. Like veneers, crowns (or caps) are made from models of your bite, and require more than one office visit to place; sometimes a root canal may also be needed to save the natural tooth. However, crowns are strong, natural looking, and can last many years.

But what about teeth like Jamie's, which have already been restored? That's a little more complicated than repairing a natural tooth. If the chip is small, it may be possible to smooth it off with standard dental tools. Sometimes, bonding material can be applied, but it may not bond as well with a restoration as it will with a natural tooth; plus, the repaired restoration may not last as long as it should. That's why, in many cases, we will advise that the entire restoration be replaced — it's often the most predictable and long-lasting solution.

Oh, and one more piece of advice: Get a custom-made mouthguard — and use it! This relatively inexpensive device, made in our office from a model of your own teeth, can save you from a serious mishap… whether you're doing Hollywood action scenes, playing sports or just riding a bike. It's the best way to protect your smile from whatever's coming at it!

If you have questions about repairing chipped teeth, please contact us or schedule an appointment for a consultation. You can also learn more by reading the Dear Doctor magazine articles “Artistic Repair of Chipped Teeth With Composite Resin” and “Porcelain Veneers.”

By Zsambeky, Chaney & Associates Family Dentistry
January 18, 2019
Category: Dental Procedures
YoumayNeedOrthodonticTreatmentBeforeObtainingImplants

You have a lot of options for replacing missing teeth, from state-of-the-art dental implants to affordable, but effective partial dentures. But if the teeth in question have been missing for a while, you may first have to undergo orthodontic treatment. Here's why.

While they may feel rigid and firm in the jawbone, teeth are actually held in place by periodontal (gum) ligaments. These elastic tissues lie between the teeth and the bone and attach to both with tiny filaments. This mechanism allows the teeth to incrementally move over time in response to biting pressures or other environmental factors.

When a tooth goes missing the teeth on either side of the space naturally move or "drift" into it to help close the gap. This natural occurrence can reduce the space for a restoration if it has gone on for some time. To make room for a new prosthetic (false) tooth, we may have to move the drifted teeth back to where they belong.

If you're thinking metal braces, that is an option—but not the only one. Clear aligners are another way to move teeth if the bite problem (malocclusion) isn't too severe. Aligners are a series of custom-made, clear, plastic trays worn over the teeth. The patient wears each tray, slightly smaller than the previous one in the series, for about two weeks before changing to the next one. The reduction in size gradually moves teeth to their intended target position.

Many adults prefer clear aligners because they're nearly invisible and don't stand out like metal braces. They're removable, so you can take them out for cleaning or for special occasions. And, we can also attach a prosthetic tooth to the tray that temporarily covers the missing tooth space.

Whichever orthodontic treatment you choose, once completed we can then proceed with restoration to permanently replace your missing teeth. While it can be a long process, the end result is a beautiful smile that could last for years to come.

If you would like more information on your dental restoration options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Straightening a Smile before Replacing Lost Teeth.”





This website includes materials that are protected by copyright, or other proprietary rights. Transmission or reproduction of protected items beyond that allowed by fair use, as defined in the copyright laws, requires the written permission of the copyright owners.